If you don't know what you want to change coming into the BIOS, you probably shouldn't change anything. F9 To Set the System BIOS and Configure Your Disks for Intel SATA or RAID. Accesses the BIOS Setup program. In Configuration settings, configure the following settings: Allow local user to change UEFI (BIOS) settings: Your options: When adjusting settings in your BIOS, be sure that you certain what the settings will affect. F8: Opens the Windows* boot option menu which allows you to boot into safe mode, enable boot logging, perform restore tasks, and more. The only caveat is that the BIOS is a startup environment, which means that you can't access it when Windows 10 is running. ; The presence of menus and settings are dependent on your board model, hardware components installed, and the BIOS version. ? For instructions on this BIOS update method, see Instructions for F7 BIOS Flash update. On the next screen, click on Recovery in the left pane. In the BIOS Utility dialog, select Advanced -> IDE Configuration. Ok clearly the 4000+ computers we changed the BIOS settings on so that when the PC was rebooted it would boot from NIC first instead of HDD... was only a dream ? some systems you can update the BIOS from inside windows, but not the actual settings themselves. 1. To access the settings, press the F2 key after the Power-On Self-Test (POST) memory test begins and before the operating system boot starts. The BIOS setup program can be used to view and change the BIOS settings for the computer. For systems with SATA disks, performing this task is required for Windows to access the disks. In the right-pane, click on Restart now option located under Advanced Startup section. Press Ctrl+P. 4. Change your settings carefully. Power on the system. PCs made prior to the release of Windows 8 probably use BIOS. The BIOS offers limited system monitoring options, so a better bet is using software that runs from Windows. You can use PowerShell to view or change BIOS settings on your computer running Windows. To access Intel MEBX: After the initial boot screen, the following message is displayed: Press to enter MEBx Setup. If you have an Intel CPU and uninstalling Hyper-V didn’t solve your problem—or your virtualization app reported that Intel VT-x was disabled—you’ll need to access your computer’s BIOS or UEFI settings. 3. F7: Initiates a BIOS update process where the update files are stored on a USB thumb drive. its called BIOS for a reason. Let’s consider some examples you can use to get or modify some BIOS settings with PowerShell through the WMI classes (Windows Management Instrumentation) on the computers of popular vendors: HP, Lenovo, Dell. Press the F2 key at the Sun logo screen to enter the BIOS Setup menu. This setting is optional, but recommended. Description: Enter a description for the profile. Enter BIOS or UEFI Using Windows Settings. Intel® XTU offers a full suite of system monitoring tools, and there are other options available as well, such as CPU-Z, CoreTemp, HWiNFO32, and more. 2. Select Next. Open Settings on your computer and click on Update & Security. Changing settings incorrectly can lead to system or hardware failure. For example, a good profile name is Windows: Configure DFCI settings on Windows devices. You can also enter BIOS using the Settings on your computer.